Universal Cutter & Tool Grinder CG-A

Specification :

   
Capacity  
Workhead--
Swing over main slide, max dia 304mm 12"
Collet work dia, max
 30mm 1.25"
min 3mm 0.12"
Lead generated by spiral lead mechanism , min 45mm 1.81"
Lead between spindle nose and tail center, max 152mm 6"
Wheelhead--  
Grinding wheel dia, max 100mm 4"
Range  
Workhead--
Main slide travel 146mm 5.75"
Offset slide travel, total 133mm 5.25"
-front of center
 76mm 3"
-rear of center 57mm 2.25"
Workhead angular adjustment--  
Horizontal plane (turntable base) 235°
Vertical plane, above center 40°
below center 40°
Wheelhead--
Longitudinal slide travel 152mm 6"
Vertical slide travel, total
 241mm 9.50"
-above center 114mm 4.50"
-below center
 127mm 5"
Cross slide travel, total 190mm 7.50"
-front of center
 76mm 3"
-rear of center 114mm 4.50"
Spindle Speeds  
Workhead, one speed
 436rpm
wheelhead, three speeds 4000,5729,8000rpm
Motors, Electric  
Workhead drive
 1/4Hp 0.186kw
wheelhead drive 1/2Hp 0.373kw
Floor Space and Weight  
Area of base only
635mmx660mm 25"x26"
Area required for machine 1524mmx1701mm 60"x67"
Height from floor to center of workead spindle 1212mm 47.72"
Height, overall with wheelhead raised 1517mm 62.12"
Net weight 691kg 1525lbs

 

Standard Accessories:

1. Wheelhead toothrest assembly with extension bar
2. Grinding wheel guards with extension bar
3. Front stock support
4. Straight cylindrical collets:
(Please select “A” or “B”)
(A) metric sizes:6,8,1O,12,16,20,25 & 32mm
Also including set of 3 taper collets:
No. 2,3,4 morse taper
(B) inch sizes:1/4,5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8, 1, 1 1/8 & 1 1/4”
5.Set of (5) grinding wheel flanges.
(4)standard and (1) extension flange.
6. Diamond holder bracket
7. Wet grinding attachment with water proof equipment
8. Wrench for workhead.
9.Toothrest centering gauge.
10. Adjustable tailstock support unit.11. Spanner for grinding wheel
11. Spanner for grinding wheel
12. Leveling blocks
13. Standard Arbor
14. Screw drive with a Set of wrenches.
15. Wheel flange with 2 collets for internal grinding
16.Double-end spanner
17. Set of (4) index plates for spiral lead Mechanism
0,8,10 & 12 divisions.
18.Tool box
19.011 bottle
20.Grinding wheel (one each of straight, flaring cup and dish shape)
21. Additional diamond truing tool with diamond nib.
22. Spring-loaded index pawl for workhead
23. 4” six-jaw chuck for workhead
24.1/2” wheel flange and spanner
25. Grinding attachment for large face milling cutter
Back